Please choose your Product from the list below.
Please choose your Product from the list below.
Return to Selection
| This file contains the installation program to install the USB BAC driver for the Tracer III. If you have a mark in Device Manager with "BAC microcontroller" in it, this driver will fix the problem and enable new functionality. NOTE: This driver requires that the Microsoft .net framework 1.1 be installed before installation. |
bac2.3.zip |
| This utility formats and makes a generic flashcard bootable so that it may be used to build a automatic imaging flashcard for re-imaging hard drives in the Tracer III or IPIX III computers. |
flashutility.zip |
Microtouch touch driver for ALL TRACER III, IPIX III, TRACER II, IPIX II products that have a Touch Screen.
This driver cannot be used in older model displays that do not use Microtouch touch controllers. It is intended for currently shipping products |
tw564sr6.zip |
| This file contains the Tracer III/IPIX III Windows 2k&XP hardware drivers for: Chipset, Video, LAN and Audio |
Gen3-drivers1.4.zip |
| Drivers for Windows XP and Windows 2000 for Model's Created after Febuary 2007 or Model Numbers ending in the last four digits 200 or better.
| Egalax-2K-XP_V4.3.6.2817..zip
|
Return to Selection
| Adjustment Utility
| lmx12adj.zip
|
Microtouch touch driver for Touch Screen units.
This driver cannot be used in older model displays that do not use Microtouch touch controllers. It is intended for currently shipping products |
tw564sr6.zip |
| Datalux Monitor Type Information File ALL Datalux Monitors
| monitor_inf.zip
|
Return to Selection
| Due to the nature of the product, no downloadable drivers are available for the 333 MHz Tracer or the IPIX 200 Series.
|
Return to Selection
Current BIOS for the Tracer and IPIX Version 1.6
USE ONLY WITH TRACER AND IPIX500 500MHz OR HIGHER
| bios18-5.zip
|
| Windows 98 drivers for the Tracer and IPIX 500 Series ONLY-- 32 MB
| w98drv.zip
|
| Windows 2000 drivers for the Tracer and IPIX 500 Series ONLY-- 13 MB
| w2kdrv.zip
|
| Generic DOS networking boot disk -- 2 MB (may not work with all systems)
| dlnet.zip
|
| Generic files to build a DOS networking boot disk including original MS-CLIENT, MODBOOT utility program, and DOS_NET.BAT --2 MB
| dosnet.zip
|
| READ ME for CD ROM (and all utilities). Applies to Recovery/Image CD ROMs but may be useful for other software.
| readme.txt
|
| CD ROM boot disk for making bootable CD ROMs.
| cdtools.zip
|
| TEAC CD ROM drivers for Tracer and IPIX 500 Series. These drivers will only work with the external CD ROM sold with the Tracer. For CD ROMs purchased from another source, use the drivers that were included with that CD ROM.
| teaccd.zip
|
| TEAC Floppy drivers for Tracer and IPIX 500 Series. These drivers will only work with the external Floppy Drive sold with the Tracer. For Floppy Drives purchased from another source, use the drivers that were included with that CD ROM.
| teacfdd.zip
|
| This file will create a bootable 1.44 floppy disk with tools to update the Bios on Tracer2 and IPIX 2 units. Additional utilities include onboard LAN adapter firmware flash utility and a tool to fix windows boot.ini errors. This disk cannot be used on Tracer or IPIX 1 models.
| T2bios185
|
